Fontana Fizz Jet Nozzle 304 Stainless steel Fontana Fizz Jet Nozzle 304 Stainless steel
Out of stock
Fontana Fizz Jet Nozzle 304 Stainless steel
Rich foam from 10cm up to more than 10 meters.
Air and water are mixed at the right proportions inside Fizz Jets to produce an utterly impressive, fizzy, foamy water column. The distinctive water shape of Fizz Jets is very rich and sturdy in spray heights of as low as 10 cm up to more than 10 meters; a highly visible and wind resistant water effect suitable to fill any scale areas with shapely, lively white-water columns.
Fizz jets are water level independent nozzles, the water shape is not affected by ripples in the pool and the frothiness of each nozzle can easily be adjusted from the internal regulator. In addition, these jets are made of Stainless-Steel offering stylish look, excellent impact resistance, low weight and they are remarkably efficient compared to the water effect they create making them one of the best solutions among the foamy nozzles.
FEATURES
- SMOOTH AND MASSIVE FOAM
- VERY RICH AIR AND WATER MIXTURE
- VERY STEADY WATER PATTERN
- HEAVY DUTY MACHINED CONSTRUCTION
- HIGHLY VISIBLE AND WIND RESISTANT
- MADE OF STAINLESS STEEL AISI 304 (316 ON REQUEST)
- NOT WATER LEVEL DEPENDENT
- WATER SUPPLY TO THE JET MUST BE LINEAR, NON-TURBULENT
- HIGHLY EFFICIENT NOZZLE DUE TO THE STAINLESS STEEL FRICTIONLESS INSIDE SURFACE
SPECIFICATIONS 25mm orifice
|
CODE |
14FN158 |
|
MATERIAL |
304 Stainless Steel |
|
INLET BSP/NPT (INCH) |
1" |
|
DIMENSIONS |
48 x 113 |
| NOZZLES ORIFICE (MM) | 25 |
|
SWIVEL BALL JOINT |
Optional |
| SUCTION STRAINER OPENING REQUIRED (MM) | 3 |
SPECIFICATIONS 32mm orifice
|
CODE |
14FN159 |
|
MATERIAL |
304 Stainless Steel |
|
INLET BSP/NPT (INCH) |
1" |
|
DIMENSIONS |
60 x 158 |
| NOZZLES ORIFICE (MM) | 32 |
| SWIVEL BALL JOINT | Optional |
| SUCTION STRAINER OPENING REQUIRED (MM) | 3 |
SPECIFICATIONS 50mm orifice
| CODE | 14FN160 |
| MATERIAL | 304 Stainless Steel |
|
INLET BSP/NPT (INCH) |
1 1/2" |
|
DIMENSIONS |
80 x 197 |
| NOZZLES’ ORIFICE (MM) | 50 |
| SWIVEL BALL JOINT | Optional |
| SUCTION STRAINER OPENING REQUIRED (MM) | 4 |
Fontana Fizz Jet Nozzle 304 Stainless steel
Rich foam from 10cm up to more than 10 meters.
Air and water are mixed at the right proportions inside Fizz Jets to produce an utterly impressive, fizzy, foamy water column. The distinctive water shape of Fizz Jets is very rich and sturdy in spray heights of as low as 10 cm up to more than 10 meters; a highly visible and wind resistant water effect suitable to fill any scale areas with shapely, lively white-water columns.
Fizz jets are water level independent nozzles, the water shape is not affected by ripples in the pool and the frothiness of each nozzle can easily be adjusted from the internal regulator. In addition, these jets are made of Stainless-Steel offering stylish look, excellent impact resistance, low weight and they are remarkably efficient compared to the water effect they create making them one of the best solutions among the foamy nozzles.
FEATURES
- SMOOTH AND MASSIVE FOAM
- VERY RICH AIR AND WATER MIXTURE
- VERY STEADY WATER PATTERN
- HEAVY DUTY MACHINED CONSTRUCTION
- HIGHLY VISIBLE AND WIND RESISTANT
- MADE OF STAINLESS STEEL AISI 304 (316 ON REQUEST)
- NOT WATER LEVEL DEPENDENT
- WATER SUPPLY TO THE JET MUST BE LINEAR, NON-TURBULENT
- HIGHLY EFFICIENT NOZZLE DUE TO THE STAINLESS STEEL FRICTIONLESS INSIDE SURFACE
SPECIFICATIONS 25mm orifice
|
CODE |
14FN158 |
|
MATERIAL |
304 Stainless Steel |
|
INLET BSP/NPT (INCH) |
1" |
|
DIMENSIONS |
48 x 113 |
| NOZZLES ORIFICE (MM) | 25 |
|
SWIVEL BALL JOINT |
Optional |
| SUCTION STRAINER OPENING REQUIRED (MM) | 3 |
SPECIFICATIONS 32mm orifice
|
CODE |
14FN159 |
|
MATERIAL |
304 Stainless Steel |
|
INLET BSP/NPT (INCH) |
1" |
|
DIMENSIONS |
60 x 158 |
| NOZZLES ORIFICE (MM) | 32 |
| SWIVEL BALL JOINT | Optional |
| SUCTION STRAINER OPENING REQUIRED (MM) | 3 |
SPECIFICATIONS 50mm orifice
| CODE | 14FN160 |
| MATERIAL | 304 Stainless Steel |
|
INLET BSP/NPT (INCH) |
1 1/2" |
|
DIMENSIONS |
80 x 197 |
| NOZZLES’ ORIFICE (MM) | 50 |
| SWIVEL BALL JOINT | Optional |
| SUCTION STRAINER OPENING REQUIRED (MM) | 4 |
