Cooke Water Witch Pool And Pond Auto Top Up

BROCHURE

INSTRUCTION MANUAL

PLEASE READ THROUGH THE INSTRUCTION MANUAL ABOVE TO VIEW INSTALLATION OPTIONS.

The Water Witch is fully designed and manufactured in Australia for the specific needs of Australian pools, spas and water features.

The Water Witch is used in many different applications and projects to maintain a minimum or maximum water level. Some of the most popular applications include:

• Swimming pools and spas
• Balance tanks
• Water features and ponds
• Infinity edge troughs
• Water / Splash parks
• Commercial pools
• Irrigation projects
• Water tanks

How Does it Work?

• The Water Witch is an electronic automatic water levelling device which uses a unique and patented electronic sensor to detect if the water in your pool or pond is below the recommended level. Filling your pool has never been so easy.

Benefits

• Designed and manufactured exclusively in Australia with authorised plumbing approval Australia wide.
• Designed for ‘Set and Forget’ installation with one less chore to do – automates your swimming pool one more step.
• Only certified Automatic Water Leveler in Western Australia and is suitable for any type of pool or spa, it is also suitable for ponds, tanks, and water features.

Please note the following important project considerations

• The Water Witch is manufactured and tested to the highest international standards. Wear and onsite conditions, however, may cause component failure. All installations must include sufficient overflow provisions to ensure a flooding event does not occur.
• Indoor pools and enclosed projects must also feature sufficient overflow provisions to avoid a potential flooding event.
• Contact your local water authority to confirm whether your proposed Water Witch supply side installation complies with the relevant water regulations.
• Individual components may need to be replaced in the future. All installations should incorporate provisions for easy part replacement.
• The Water Witch includes wearing components that may fail or be affected by onsite conditions. A visual inspection of all components is required at least every month to ensure the unit is operating correctly.
• The Water Witch is approved for indoor and outdoor use. However, consider what effect the environment may have on the unit when deciding on an installation location.
• Sensor is to be installed into CLASS 9 OR 12 50MM PRESSURE PIPE.
• PLEASE NOT THAT THE BACKFLOW PREVENT DECIVE (CHECK VALVE) IS AN OPTIONAL EXTRA.

Sensor cable length options

• 5 METERSS
• 20 METERS
• 30 METERS
• 40 METERS
• 50 METERS
• 60 METERS
• OPTION FOR SPECIAL ORDER SENSOR CABLE LENGTHS UP TO 250M

Cooke Water Witch Pool And Pond Auto Top Up

BROCHURE

INSTRUCTION MANUAL

PLEASE READ THROUGH THE INSTRUCTION MANUAL ABOVE TO VIEW INSTALLATION OPTIONS.

The Water Witch is fully designed and manufactured in Australia for the specific needs of Australian pools, spas and water features.

The Water Witch is used in many different applications and projects to maintain a minimum or maximum water level. Some of the most popular applications include:

• Swimming pools and spas
• Balance tanks
• Water features and ponds
• Infinity edge troughs
• Water / Splash parks
• Commercial pools
• Irrigation projects
• Water tanks

How Does it Work?

• The Water Witch is an electronic automatic water levelling device which uses a unique and patented electronic sensor to detect if the water in your pool or pond is below the recommended level. Filling your pool has never been so easy.

Benefits

• Designed and manufactured exclusively in Australia with authorised plumbing approval Australia wide.
• Designed for ‘Set and Forget’ installation with one less chore to do – automates your swimming pool one more step.
• Only certified Automatic Water Leveler in Western Australia and is suitable for any type of pool or spa, it is also suitable for ponds, tanks, and water features.

Please note the following important project considerations

• The Water Witch is manufactured and tested to the highest international standards. Wear and onsite conditions, however, may cause component failure. All installations must include sufficient overflow provisions to ensure a flooding event does not occur.
• Indoor pools and enclosed projects must also feature sufficient overflow provisions to avoid a potential flooding event.
• Contact your local water authority to confirm whether your proposed Water Witch supply side installation complies with the relevant water regulations.
• Individual components may need to be replaced in the future. All installations should incorporate provisions for easy part replacement.
• The Water Witch includes wearing components that may fail or be affected by onsite conditions. A visual inspection of all components is required at least every month to ensure the unit is operating correctly.
• The Water Witch is approved for indoor and outdoor use. However, consider what effect the environment may have on the unit when deciding on an installation location.
• Sensor is to be installed into CLASS 9 OR 12 50MM PRESSURE PIPE.
• PLEASE NOT THAT THE BACKFLOW PREVENT DECIVE (CHECK VALVE) IS AN OPTIONAL EXTRA.

Sensor cable length options

• 5 METERSS
• 20 METERS
• 30 METERS
• 40 METERS
• 50 METERS
• 60 METERS
• OPTION FOR SPECIAL ORDER SENSOR CABLE LENGTHS UP TO 250M